Install And Configuration of CSMARS

Steps to Install and Configure CSMARS:

1. Insert the CSMARS Software CD into the CD Drive and boot the CSMARS Device.
2. Select the type of Controller you want to install for example Global Controller or Local Controller.
3. After Selecting, the installation process starts and goes for 10 to 15 minutes.
4. After installation is completed u will get see the login prompt of CSMARS device.
5. The default username is pnadmin and password is pnadmin.
6. Pnadmin username is the administrative user account.
7. Now lets start to configure CSMARS device to monitor your network and Network Devices for any Security Threats
8. CSMARS device comes with two Gigabit  Ethernet Interfaces and one interface will be assigned with default ipaddress ( i.e 192.168.0.X series )
9. Now assign the ipaddress , subnet mask and the default gateway address according to your organization  rules
10. After assigning Ipaddress only you are really ready to configure CSMARS devices to play a vital role in securing your network.
11. Take your CSMARS device remotely using web browser.
12. Login through the Logon Credentials.
13. You will be asked to upload licence file document which you got while purchase.
14. That’s  all you almost configured the CSMARS device basically.

           Don’t take a breath there are lots to configure ,that will be updated very shortly .